High Efficiency Device Test
Overview
What is high-efficiency equipment?
The equipment is a high-efficiency energy product certified by Korea Energy Management Corporation after satisfying all criteria of energy consumption rate and quality tests.
What is the certification system?
In accordance with Articles 22 and 23 of Energy Use Rationalization Act, the efficiency assurance system has been implemented since December of 1996 in order to activate the distribution of high-efficiency energy equipment by certifying products that are above certain criteria.
Business Process
Applicable Items
| Equipment | Sample No. |
Range of Application |
|---|---|---|
| Three-phase squirrel-cage
induction motors |
2 | General three-phase squirrel-cage induction motors with 600V or lower voltage and above KS C 4202 standard |
| 26㎜ 32W fluorescent lamps | 10 | Fluorescent lamps with KS C 7601 standard or higher, and after testing the attachment of own stabilizers, the lamp efficiency is above the value that is half the total luminous flux of attachment 3 of KS C 7601 by the power of standard lamps. (The lamp efficiency must be at 87㏐/W or higher) |
| 26㎜ 32W Stabilizers for
fluorescent lamps |
10 | Fluorescent lamps with KS C 7601 standard or higher, and after testing the attachment of own stabilizers, the lamp efficiency is above the value that is half the total luminous flux of attachment 3 of KS C 7601 by the power of standard lamps.(The lamp efficiency must be at 87㏐/W or higher) |
| Stabilizer Built-in Lamps | 15 | Amongst the products that use the rated voltage of AC220V/60㎐ and received safety certification in accordance with Electric Appliances Safety Control Act or KS-certified products, products that combine the regular fluorescent lamps and discharge lamps |
| Automatic Illumination
\AdjustingLighting Devices |
5 | Switch devices that are similarly used at home and office, which are indoor and outdoor electrical switch devices ？ automatic illumination adjusting lighting devices. To save energy, this standard is applied for switch devices that are designed to light up the lamp with voltage of 250V or lower and rated current of 16A. |
| Waste Heat Recovery-type
Ventilators |
2 | Air-cooled and heat exchanging air suppliers that are installed between the indoor and outdoor of buildings, which use rated current of 600V or lower and rated wind of 3,000N㎥/h or lower |
| Pumps | 2 | The diameter of induced caliber and discharge caliber is 200mm or less and standard amount of discharge is 15.0㎥/min or less |
| Ventilators | 2 | The size of the blade diameter is 0.5m or less, and amongst ventilators at home or office, single-phase motor (attached controller included) operates it while having axial or centrifugal blades and the power consumption is 300W or less |
| Centrifugal Ventilator | 2 | The centrifugal ventilator (hereinafter referred to as a ventilator or a fan) with pressure ratio at 1:1 or less or transmission pressure at 10kPa or less of direct acting valve operation, and its external diameter of the impeller is between 160mm and 1,800mm, and is being used for ventilating, exhausting and air conditioning in buildings and factories in general. |
| Stabilizers for 16㎜
FluorescentLamps |
10 | It is a high-frequency lighting system regulated by KS C 8100, from the test lamps regulated by KS C 7601, and when lighting, the ratio of the lighting conversion efficiency is over 0.92 between the output of lighting device and the same lamp and the input of related stabilizer |
| Underwater Amplifier | 1 | It is to process waste water and sewage, and the underwater amplifier forcefully amplifies and stirs the oxygen and must have a rated output at 30㎾ or less and the diameter of induced caliber is 250㎜ or less |
| Metal Halide Lamps | 5 | The metal halide lamps that are regulated by KS C 7607, and rated lamp power must be 150W, 200W, or 350W |
| Stabilizer for
FPL 32W Compact Fluorescent Lamps |
5 | Amongst general fluorescent lamps regulated by Korea Illumination Industry Cooperative in accordance with Article 28 of Industrial Standardization Act, they are stabilizers for FPL 32W compact fluorescent lamps for indoor or appliances |
| FPL 32W Compact
Fluorescent Lamps |
5 | FPL 32W compact fluorescent lamps (starter non-built-in type) that use the alternating current circuits regulated by Korea Illumination Industry Cooperative in accordance with Article 28 of Industrial Standardization Act |
| Oil Combustion
Hot Water Boilers |
1 | Hot water boilers with rated power capacity of 50,000㎉/h or less, which use kerosene, diesel, or crude petroleum oil for fuel and its maximum usage pressure is 0.343MPa{3.5㎏/㎠} or lower |
| Industrial and Building
Oil-fueled Boilers |
1 | Depending on the created heat medium, the rated power of steam boilers must be 20T/h or lower and the maximum consumed pressure at 0.98MPa {10.0㎏/㎠} or lower; for hot water boilers, the rated power at 1,000,000㎉/h or lower and maximum consumed pressure at 0.98MPa {10.0㎏/㎠}, respectively; they must use diesel or kerosene for the fuel |
| Regenerating Burners | 1 | Regenerating burners that use the technology of having the sensible heat of waste gas exhausted from the body of industrial furnace pass the heat storage materials, and letting the accumulated heat combust the air; they must use LNG / LPG of 50,000 ？ 9 million kcal/h as the fuel |
| Turbo Blower | 2 | Motor-driven and turbo-type blower with pressure ratio at 1.1 or higher or the delivery pressure at 10 kPa or higher |
| LED Exit Sign | 5 | Exit Sign that uses LED (Light Emitting Diode) as the source of light |
| Thermo-hygrostat | 2 | Amongst thermo-hygrostat, those with a rated cooling power at 6kW{5160kcal/h} or higher and lower than 35kW{30100kcal/h} |
| Multi-Air Conditioner | 1 | Amongst multi-air conditioners, the outdoor devices with a rated cooling power at 23kW{19780kcal/h} or higher and are combined cooling and heating system |
| Converter External
LED Lamps |
5 | General 30W or lower lighting converters for external LED lamps with the rated voltage of AC/DC 50 V or less |
| Converter
Mounted LED Lamps |
5 | General 60W or lower lighting converters for mounted LED lamps with AC 220 V, 60 Hz (applied for built-in converters only) - ~10W, 10～20 W, 20～30 W, 30～40 W, 40～50 W, 50～60 W |
| Built-in and Fixed
LED Lighting Devices |
5 | General 60W or lower lighting converters for mounted LED lamps with AC 220 V, 60 Hz (applied for built-in converters only) - ~10W, 10～20 W, 20～30 W, 30～40 W, 40～50 W, 50～60 W |
| LED Security Lamps | 5 | LED security lamps that use AC 220V, 60Hz - ~70W, 70W~150W, 150W or over |
| LED Sensor Lamps | 5 | Amongst products with safety certification in accordance with Electric Appliances Safety Control Act, the rated 30W or lower LED sensor lamps with AC 220V 60 Hz - ~10W, 10W~20W, 20W~30W |
| LED Module Powered
Converters |
5 | Electronic controller for LED modules and lamps that use AC 220 V, 60㎐ and output voltage at DC250V or lower |
| PLS (Plasma Lighting System)
Lighting Devices |
PLS-type electrodeless lamps for indoor and outdoor with microwave energy of ISM (industrial scientific and medical) band at 1000V or lower - 700W, 1000W / Fire-absorbed cool and hot water dispensers |
Required documents by items
| Items (fields) | Required documents |
|---|---|
| Luminaires Field | 1 copy of application Samples (see sample submission number) A copy of circuit diagram, a copy of product description, a list of parts, a copy of KC or KS certificate (But, for Electrical Appliances Safety Certification, submit the application and samples only) |
| Motor | 1 copy of application Samples (see sample submission number) A copy of circuit diagram |
| Uninterruptible
power supply, inverter |
1 copy of application Samples (see sample submission number) A copy of circuit diagram |
| All items except
mentioned as above |
Specifications Main drawing Main parts leasing |
